NEW: Marshall JCM800 2204 |
| BOARD OPTIONS |
MARSHALL STYLE CIRCUIT BOARDS |
**We build many different Marshall boards. Some are not listed here. Please e-mail with inquiries. |
MARSHALL JCM800 2204...
$35.00 Measures 3.125 x 11.5" |
 |
MARSHALL 1959HW REPLACEMENT...
$40.00 Drops right in to the new Marshall hand wired 1959 amps. Measures 3 x 11-5/8" |
|
MARSHALL 18 WATT ORIGINAL LAYOUT WITH TREMOLO... $22.50 Measures 10.25 x 2.625" |
 |
MARSHALL 18 WATT RICHIE HALL'S IMPROVED TREMOLO LAYOUT... $22.50 A slight variation to the original. Full wiring diagram from 18watt.com |
 |
18 WATT "TMB" VERSION ... $22.50 TMB stands for treble, mid, bass. This version substitutes the tremolo channel for tone controls and more volume options. 10.25 x 2.625". Full wiring Diagram from 18WATT.COM |
 |
MARSHALL 18 WATT LITE... $19.50 Single channel version of the Marshall 18 Watt amplifier. These amps sound great. Board measures 2.625 x 7.25" Layout diagram |
 |
Mounting holes were drilled for
customer. |
MARSHALL 18 WATT LITE Variation #2... $22.50 This one has the filter caps on the board. Measures 2.625 x 8.5" |
 |
MARSHALL 18 WATT LITE "Silvatone layout"... $22.50 I've had quite a few requests for this board so I decided to offer it. This board, like the one above, holds all of the filter caps. No can capacitor required. Measures 11" x 3.125. *Recently extended from 10" tp 11" length for easier component installation. LAYOUT |
 |
RICHIE HALLS' 36 WATT MARSHALL DESIGN... $24.50 Based on the Marshall 18 Watt with Double the power. Whoaa! Measures 12.5 x 2.625" Layout diagram drawn by Pete Ankelein |
 |
MARSHALL JTM 45... $25.50 Measures 10-1/2" by 3-1/8". We narrow the spacing of the turrets on our JTM boards so you can use carbon comp resistors. |
 |
EARLY MARSHALL SUPERLEAD PLEXI... $35.00 Variation #1 Measures 3-1/8" by 10-1/8" This board is based on an early 67/68 Plexi.. |
 |
MARSHALL SUPERLEAD PLEXI... $35.00 Variation #2 With bias pot lugs Measures 3-1/8" by 10-5/8" Same as above board but this one has lugs to hold bias pot. *We have narrowed up the turret distance across the board to 2.25" to allow the use of common 1/2w resistors. |
PHOTO |
MARSHALL '75 SUPERLEAD... $42.50 DROP IN REPLACEMENT BOARD Measures 11-5/8" long by 3-1/8" wide. Mounting holes are pre-drilled and board comes with all the wiring holes. |
 |
Close-up photo of double turrets If you need the turrets drawn in on this for 1/2w resistors please let us know when you order. |
